Universal soil compactor 100/150 mm

Standards: EN 13286-2; ASTM D 1557; DIN 18127; NF P 94-093

Universal soil compactor 100 + 150 mm for the automatic compaction of simple and modified Proctor specimen 100 and 150 mm. Floor model for installation on every stable base with safety door.

The Proctor mould is placed on the rotating base plate and the corresponding rammer is inserted into the lifting device. The drop height as well as the angle of rotation per drop are controlled by interchangeable drive and angle plates. The movement of the impact surface towards edge / center / edge is made by means of an electric motor.

The complete compaction process is controlled by a microprocessor system with universal software and preselectable parameters:

  • number of drops per layer;
  • number of layers;
  • angle of rotation per drop;
  • series of drops (center / edge ..).

Included in delivery are easy interchangeable drive plates for the drop heights as well as angle plates for the angle rotation per drop.

Rammers are required in addition and if necessary additional accessories depending on the standard.

 

Universal  electro-hydraulic extruder, 100 kN

  • Universal extruder electro-hydraulic 100 kN compact design with 4 columns frame.
  • The hydraulic power unit with double acting hydraulic cylinder stroke 350 mm are installed in the lower housing.
  • The extruding load can be controlled via manometer.
  • Supplied with plates for Marshall samples 100 mm diameter.
  • Plates and intermediate rings for Marshall samples 150 mm diameter available as an option.