+372 736 2716
tartu@estdoma.ee

Marshalli haamer

Toote weebilehe link
Kontaktisik
Rainer Sults

20-1475 Marshall impact tester

  • Standard: EN 12697-30 B
  • Marshall impact yester with wooden anvil.
  • Basic frame provided with a steel mould to be filled with concrete on site and wooden anvil with base plate and rapid mould spanner set.
  • The motorized lifting unit with chaine provides the required drop height.
  • The presetting counter stops the motor after reaching the preselected numbers of drops.
  • For 101 mm moulds.

20-1500 Marshall impact tester

  • Standard: EN 12697-30 A
  • Impact tester marshall frame with steel anvil, protection door and rapid mould spanner set.
  • The motorized lifting unit with chaine provides the required drop height.
  • The presetting counter stops the motor after reaching the preselected numbers of drops.
  • By opening the mould spanner the rammer is automatically lifted up enabling easy removal or turning of mould set.
  • For 101 mm moulds.

20-1505 Marshall impact tester 100/105

  • Standard: EN 12697-30 A
  • Impact tester marshall 100/150 universal machine for the preparation of Ø 101 mm and Ø 150 mm Marshall specimen.
  • Frame with steel anvil, protection door and rapid mould spanner set.
  • The motorized lifting unit with chaine provides the required drop height.
  • The presetting counter stops the motor after reaching the preselected numbers of drops.
  • By opening the mould spanner the rammer is automatically lifted up enabling easy removal or turning of mould set.
  • Supplied with interchangeable rammer for 100 mm specimen – rammer for 150 mm available as accessory.

Universal  electro-hydraulic extruder, 100 kN

  • Universal extruder electro-hydraulic 100 kN compact design with 4 columns frame.
  • The hydraulic power unit with double acting hydraulic cylinder stroke 350 mm are installed in the lower housing.
  • The extruding load can be controlled via manometer.
  • Supplied with plates for Marshall samples 100 mm diameter.
  • Plates and intermediate rings for Marshall samples 150 mm diameter available as an option.