Marshall impact tester
20-1475 Marshall impact tester
- Standard: EN 12697-30 B
- Marshall impact yester with wooden anvil.
- Basic frame provided with a steel mould to be filled with concrete on site and wooden anvil with base plate and rapid mould spanner set.
- The motorized lifting unit with chaine provides the required drop height.
- The presetting counter stops the motor after reaching the preselected numbers of drops.
- For 101 mm moulds.
20-1500 Marshall impact tester
- Standard: EN 12697-30 A
- Impact tester marshall frame with steel anvil, protection door and rapid mould spanner set.
- The motorized lifting unit with chaine provides the required drop height.
- The presetting counter stops the motor after reaching the preselected numbers of drops.
- By opening the mould spanner the rammer is automatically lifted up enabling easy removal or turning of mould set.
- For 101 mm moulds.
20-1505 Marshall impact tester 100/105
- Standard: EN 12697-30 A
- Impact tester marshall 100/150 universal machine for the preparation of Ø 101 mm and Ø 150 mm Marshall specimen.
- Frame with steel anvil, protection door and rapid mould spanner set.
- The motorized lifting unit with chaine provides the required drop height.
- The presetting counter stops the motor after reaching the preselected numbers of drops.
- By opening the mould spanner the rammer is automatically lifted up enabling easy removal or turning of mould set.
- Supplied with interchangeable rammer for 100 mm specimen – rammer for 150 mm available as accessory.
Universal electro-hydraulic extruder, 100 kN
- Universal extruder electro-hydraulic 100 kN compact design with 4 columns frame.
- The hydraulic power unit with double acting hydraulic cylinder stroke 350 mm are installed in the lower housing.
- The extruding load can be controlled via manometer.
- Supplied with plates for Marshall samples 100 mm diameter.
- Plates and intermediate rings for Marshall samples 150 mm diameter available as an option.